Well I finally got a DPC3939b and last I was able to check was getting 8 downstreams and 3 upstreams (up from 4x3 on the SMC)
but here's what annoys me that I wasn't expecting.
the part of the config for it's private lan IP is integrated with its DHCP server.
well I wanted it'd private lan IP to be 192.168.100.1 and it's DHCP server to be OFF.
well now I can't access it's web interface at all its like it just shutdown it's web UI
I don't want it to use an 10. address because that's what I use internally and though I don't currently use 10.1.x.x if I did in the future I don't want it to overlap and thus block access to the CM or to my net.
I've tried resetting it but no good.
also it was fairly slow to change the wifi/moca/ect to off (and even then I know I need to get Comcast to turn off the xfinity wifi)
oh also although I had mysteriously gotten boosted from 50/10 to 100/20 with the SMC and that was part of why I wanted more downstreams, (IE more reliable down load bandwidth) it seems now I'm back to 50/10
so I guess its the lan private IP and the speed that are most annoying me.
after I can reach it again I'll still have to re-do my monitoring page as it was made for the SMC and its clear the HTML is very different.
--
semper idem
1KTzRMxN1a2ATrtAAvbmEnMBoY3E2kHtyv
↧