Started using a SB6121 a friend gave me. Mostly my connection quality and speeds are good, but I get a lot of T3 time-outs. Do these numbers look ok:
Channel ID 2 3 6 7
Frequency 549000000 Hz 555000000 Hz 573000000 Hz 579000000 Hz
Signal to Noise Ratio 37 dB 37 dB 37 dB 37 dB
Downstream Modulation QAM256 QAM256 QAM256 QAM256
Power Level
The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading
4 dBmV 4 dBmV 2 dBmV 4 dBmV
Upstream
Bonding Channel Value
Channel ID 2 1 3
Frequency 27400000 Hz 33800000 Hz 22600000 Hz
Ranging Service ID 11182 11182 11182
Symbol Rate 5.120 Msym/sec 5.120 Msym/sec 2.560 Msym/sec
Power Level 44 dBmV 45 dBmV 43 dBmV
↧