I've got a CGM4140COM, with software CGM4140COM_4.0p12s1_PROD_sey.
xfi has removed port forwarding from the gateway web server. Instead you are directed to use myxfi on the web.
I have an existing ssh port 22 forward. I want to set up a private ftp server: ports 20-21. If I edit the ssh device, the existing port forward appears, but I can only change or delete that port forward. That port forward was set up directly on 10.0.0.1, the gateway web server.
If I try to add a new port forward through the web, I can not add a port when I edit the port forwards for the device. You can only change the existing port or delete it. You can not add a new port forward there.
If I try to Add a New Port Forward altogether, I can specify the correct device in the drop down box, and add the port range. But the new port forwards are not assigned to the correct device, which is on 10.0.0.61.
I get:
No Associated Device
Reserved IP Address:
10.0.0.2
Port Range
20 – 21
Protocol
TCP
Has anybody had any success with the web access for port forwards ? Is there any updated document on port forwarding ?
↧